DWX-52DCi

Specifications

  • Cuttable Material | Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Fiber reinforced resin, soft milling CoCr sintering metal
    Loadable Workpiece Shape
  • Step Section | 98.5 mm (diameter), height 10 mm
  • Body Section | 95 mm (diameter), height max. 35 mm, Pin diameter: 6 mm
  • Pin Type Diameter | 6 mm

Loadable workpiece weight | Up to 850 g
Number of adapters housed | 6
Operating speed| XYZ axis: 0.24 to 70.9 in./min.(6 to 1,800 mm/min.)

Spindle motor | Brushless DC Motor

Spindle Speed | 6,000 to 30,000 rpm

Rotary Axis Travel Angle

A Axis | ±360°
B Axis | ±30°

Number of burs housed | 15

Attachable bur

Shank diameter | 4 mm
Length | 40 to 55 mm

Compatible compressed air| 0.2 MPa

Interface| USB

Control Command Set | RML-1, NC code
Power Requirements | AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A (overvoltage category II, IEC60664-1)
Power Consumption | Approximately 200 W

Operating Noise

During operation | 70 dB(A) or less (when not cutting)
During standby | 45 dB(A) or less

External Dimensions

Width x Depth x Height: |34.6 x 26.0 x 23.6 in. (880 x 660 x 600 mm)

Weight | 105 kg (231.5 lbs.)
Installation Environment | Indoor use, Altitude: Up to 2,000m (6,562 ft.), Temperature: 5 to 40 ℃ (41 to 104°F), Humidity: 35 to 80 % (no condensation), Ambient pollution degree: 2 (as specified by IEC 60664-1), Short-term temporaty overvoltage: 1440 V, Long-term temporaty overvoltage: 490 V
Included Items | Power cord, Power plug adapter, USB cable, Manuals, Roland DG Software Package CD, Detection pin, Automatic correction jig, Pin-type material adapter, Hexagonal driver, Spanner, Milling bur holders, Milling bur positioner, Dust collection hoses, Dust collection hose adapter, Regulator, Cleaning tool, Option adapter labels, Material adapters