DWX-4

• Cuttable Material | Zirconia (pre-sintered), Wax, PMMA, Composite resin
  Loadable Workpiece Shape

• Block | Width x Depth: 76×38, Height: 10 to 22 mm
• PIN type | Width x Depth x Height: Maximum 85 x 40 x 22 mm

Operating speed| XYZ axis: 6 to 1800 mm/min. (0.24 to 70.8 in./min.)
Spindle motor | Brushless DC Motor
Spindle Speed | 6,000 to 30,000 rpm
Rotary Axis Travel Angle

A Axis | ±360°

Number of tools housed | 2
Attachable tool | Shank diameter: 4 mm, Length: 40 to 55 mm
Compatible compressed air| 0.02 to 0.2 MPa
Interface| USB
Control Command Set | RML-1, NC code
Power Requirements | AC100 to 240 V ± 10 %, 50/60 Hz, 0.8 to 0.4 A (overvoltage category II, IEC 60664-1)
Power Consumption | Approx. 70 W
Operating Noise

During operation | 70 dB (A) or less (when not cutting)
During standby | 40 dB (A) or less

External Dimensions | Width x Depth x Height: 340×365×405 mm (13.4×14.4×16.0 in.)

Weight | 22 kg (48.5 lbs)
Installation Environment

Indoor Use, altitude |up to 2000 m
Temperature | 5 to 40 °C (41 to 104 °F)

Relative humidity | 35 to 80 % (no condensation)
Ambient pollution degree | 2 (as specified by IEC 60664-1)

Short-Term Temporary Overvoltage | 1440 V
Long-Term Temporary Overvoltage: | 490 V

Included Items | Power cord, USB cable, Manual, Software Package CD-ROM, Detection pin, Automatic correction jig, Clamp for block workpiece, Hexagonal screwdriver, spanner, Tool holder, Tool positioner, Dust collection hose, Regulator, etc.