CA-DK1-TR

Advanced Digital Denture Production Solution

Time Reduction Kits
DWX-52DCi
DWX-52DC
DWX-52D

Overview​

CA-DK1-TR provides
A complete denture milling solution
using CAD software with excellent repeatability.

By performing the artificial tooth bonding in the polymerization process, it is possible to reduce the number of steps and at the same time to expect the adhesive strength of the artificial tooth equivalent to that of the conventional method.

FEATURES

Original solution provided by DGSHAPE.
You can challenge digital denture at low cost just by adding it to DWX-52DCi/52DC/52D.
Digitize all processes from design to milling.

Components needed

to create a digital denture using CA-DK1-TR

Digital Dentures

The CA-DK-1 is a Denture-specific mold that accepts common denture cast material which can be cured and immediately milled to the precise anatomy of the patient. With the CA-DK-1TR option, mill the placement of denture teeth before pouring the resin and avoid the hassle of individual teeth placement!

DGSHAPE invented an industry-first solution for Denture Base milling – full denture base millable blanks from mixed acrylics. Mix, polymerize, mill, and polish your way to the latest, most innovative way to digitize removable dentures for your business. Using your own cast resin to dramatically reduce costs!

QUALITY

Not necessary to manually bond the artificial teeth.

It was necessary to manually attach artificial teeth after milling the denture base when you use CADK1. However, with CA-DK1-TR, artificial teeth are embedded before pouring cold-cured resin, so only manual finishing work is required after milling.
Therefore, manual works was largely reduced. In addition, CA-DK1 was suitable for carving out artificial teeth in an arch shape and adhering them,but CA-DK1-TR made it possible to use ready-made artificial teeth.

“Man-hour reduction” “artificial tooth arrangement as designed” “artificial tooth and denture base can be expected to have the same adhesive strength as conventional methods”

DGSHAPE DENTAL CAM

CAM Software
Purposefully Developed to use
with the CA-DK1/CA-DK1-TR/CA-MK1

If so, you just found your simplest solution for creating Digital Dentures and Models with the smallest investment.

*Make sure your CAD supports Dentures and Models.

CA-DK1-TR

ADDITIONAL INFORMATION

  • SPECIFICATIONS
  • ACCESSORIES
  • FAQ
IMPORTANT

The CA-DK1 is required for the complete workflow and must be prepared separately. CA-DK1-TR is a consumable item and cannot be re-used for a different case.

COMPATIBLE CAD

Full Denture Design Module / 3Shape

COMPATIBLE CAM

MillBox 2020 for DWX-52DCi,52DC,52D + TR Module / CIMsystem

COMPATIBLE MODELS

DWX-52DCi

DWX-52DC

DWX-52D

 

The CA-DK1 is required for the complete workflow and must be prepared separately. CA-DK1-TR is a consumable item and cannot be re-used for a different case.

 

Q1. What is the difference between CA-DK1 and CA-DK1-TR?

It was necessary to manually attach artificial teeth
after milling the denture base when you use CADK1. However, with CA-DK1-TR, artificial teeth are
embedded before pouring cold-cured resin, so only
manual finishing work is required after milling.
Therefore, manual works was largely reduced. In
addition, CA-DK1 was suitable for carving out
artificial teeth in an arch shape and adhering them,
but CA-DK1-TR made it possible to use ready-made
artificial teeth.

Q2. Can I use my current tools to mill digital
dentures with CA-DK1-TR?

Be sure to use genuine tools for roughing tools (ZRB100D).Genuine tools are recommended.

Q3. Will the Removable Denture Kit II be
available for all versions of MillBox?

No. Millbox after 2020 and TR module (purchased
separately) are required. If you are using a previous
version, you can use it by updating and purchasing
the module. In that case, in addition to the update
fee, the module purchase fee is required.

Q4. Will CA-DK1-TR be available for users
with a different version of CAM software than
MillBox or Sum3D?

It’s not available. Only Millbox is supported as of
May 20th, 2020.

Q5. Are there any other CAD software
platforms that can be utilized with this
workflow?

No. Only 3shape (Full Denture Module) is supported
as of May 20th, 2020.

Q6. Can I use heat-cured acrylic as a base
for this workflow? If not, which acrylics are
compatible with this Kit?

Heat-cured resin cannot be used. Cold-cured resin
such as Dentsply Sirona, Lucitone HIPA, Ivoclar and
ProBase Cold can be used.

Q7. Does CA-DK1-TR come with artificial
teeth? If not, how do I know which artificial
teeth to use?

Artificial teeth are not included. Please see "Major
teeth libraries" on the 3Shape homepage. Since
there are some output limitation for milling such as
Bridged teeth, Separated teeth, please check it
before using CA-DK1-TR.

Q8. Will Removable Denture Kit II be
available for DWX-51D and DWX-50 milling
devices?

Denture Kit II is not available for DWX-51D and DWX50 milling devices. Available devices are DWX-52D,
DWX-52DC and DWX-52DCi.

CA-DK1-TR

Get CA-DK1-TR Today!